Recirculation warming cabinet as a built-in module with a height of 810 mm
Description
For module – cup warmer (height 710 mm):
Also available with 3 pull-outs!
The dish racks and the cups are not included in the scope of delivery .
The cup warmer with a system
Simply remove the dish rack from the dishwasher and place it completely with the cups into the cup warmer.
This means the troublesome restacking of the cups can be eliminated.
The fan-heated warming cabinet is manufactured as a built-in module so that it can be integrated into counter units or rear cabinet units. The special fan heating with high output and robust circulating air blower ensures even and rapid heat distribution. Double-walled construction with internal insulation. Interior and exterior surface made of stainless steel, material 1.4301. The three or four drawers are with stainl...
Even heat distribution through fan heating
High heating output (1200 W)
Stainless steel telescopic runners
Service-friendly For dish racks 500 mm x 500 mm
For module cup warmer (height 810 mm):
Reliable technology for everyday commercial use
High heating output 1200 W
Service-friendly For dish racks 500 mm x 500 mm
Perforated insert shelf for one use 13719 190 € without dish racks (The usable height of the pull-out is reduced by approx. 15 mm.)
The fan-heated warming cabinet is manufactured as a built-in module so that it can be integrated into counter units or rear cabinet units. The special fan heating with high output and robust circulating air blower ensures even and rapid heat distribution. Cabinet body completely made of stainless steel, material 1.4016, front exterior side with ground surface. Externally exposed open insulation. The three or fou...
Dimensions: Width 600 mm, height 810 mm, cabinet body depth 600 mm panels protruding
For module cup warmer, height 810 mm:
Cup warmer, height: 810 mm This cup warmer can be mounted together with the refrigerated base units of the KUB 810 series and the dry modules with a height of 810 mm on plinth rails (height 40 or 50 mm) to form a block (see Chapter 10: KUB 810 and dry modules 810 mm). The plinth rail must be added separately per linear meter of cabinet body length. The cup warmer and the dry modules are designed so that the lower base...
